D6PF1G960M3B6 [TAIYO YUDEN]
Please read this notice before using the TAIYO YUDEN products;型号: | D6PF1G960M3B6 |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | Please read this notice before using the TAIYO YUDEN products |
文件: | 总12页 (文件大小:959K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-
vance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
SAW/FBAR DEVICES for MOBILE COMMUNICATIONS
REFLOW
■ ORDERING CODE
(A)Previous Rule (applied to products registered on March 31, 2010 or before.)
F A R - D 6 N F - 1 G 9 6 0 0 - P 1 B Z - Z
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
❶Family
❷Common sign
❹Package type
❼Frequency
❽Common sign
❿Serial Number
-
Fixation
-
Fixation
❺Product type
❻Common sign
Fixation
❸Series
❾Design
⓫Custom, Status
⓬Packing
-
Product
Frequency Range
700-1000MHz
1000-5000MHz
700-1000MHz
700-1000MHz
1000-5000MHz
700-1000MHz
1000-5000MHz
D5
D6
Duplexer
Duplexer
J5 Dual Duplexers
F5
Device
F6
Device
G5 Dual Devices
G6 Dual Devices
(B)New Rule (applied to products registered on April 1, 2010 or later.)
D 6 N F 1 G 9 6 0 P 1 B Z - Z
❶
❷
❸
❹
❺
❻
❼
❽
❶Series
❷Package type
❹Frequency
❺Design
❻Serial Number
❽Packing
Product
Duplexer
Duplexer
Frequency Range
700-1000MHz
1000-5000MHz
700-1000MHz
700-1000MHz
1000-5000MHz
700-1000MHz
D5
D6
❸Product type
❼Custom
J5 Dual Duplexers
F5
Device
F6
Device
G5 Dual Devices
G6 Dual Devices 1000-5000MHz
*For further details, please contact to TAIYO YUDEN Co.,Ltd.
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
2.5×2.0×0.6(8pin)
2.5×2.0×0.6(9pin)
2.5×2.0×0.65
2.0×1.6×0.5
0.6max
0.6max
0.65max
0.5max
2.5±0.1
2.5±0.1
2.5±0.1
2.0±0.1
2.0±0.1
2.0±0.1
2.0±0.1
1.6±0.1
index
index
index
index
4-0.9625
4-0.9625 2-0.3
4-0.9625 2-0.3
4-0.775 2-0.325
0.9×0.375
C0.15
0.9×0.375
0.60×0.30
C0.15
C0.15
4-0.7375
8-0.375
4-0.7375
8-0.375
4-0.7375
4-0.575
8-0.30
C0.15
8-0.375
Unit:mm
Unit:mm
Unit:mm
Unit:mm
8-0.425
8-0.425
8-0.425
8-0.30
1.4×1.0×0.5
1.1×0.9×0.5
1.8×1.4×0.5
1.5×1.1×0.5
0.5max
0.5max
1.80±0.1
1.50±0.1
1.40±0.1
1.10±0.1
0.5max
0.5max
1.40±0.1
1.10±0.1
1.00±0.1
0.90±0.1
index
index
index
index
1.41
0.47
1.17
0.39
0.50 0.50
0.25
0.40 0.40
0.20
0.60
0.25
0.60
0.39
0.18
0.49
1.00
0.78
0.325
0.25
0.25
0.21
0.25
0.18
0.325
0.25
0.25
0.2
0.24
0.18
0.21
0.23
Unit:mm
Unit:mm
Unit:mm
Unit:mm
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
133
■ PART NUMBERS
●Duplexers
Package Size
(mm)
Insertion Loss
(dB)
System
Part number
Isolation(dB)
Remarks
FAR-D6JG-2G1400-D3FZ
FAR-D6JH-2G1400-B1BT
D6PE2G140P3AW
FAR-D6NH-1G9600-M1Z9
FAR-D6NH-1G9600-M1Z6
D6PF1G960M3B6
FAR-D6NF-1G9600-P1BT
D6NF1G960P1BR
D6HH1G960BH95
2.5×2.0×0.65
2.5×2.0×0.65
2.0×1.6×0.5
2.5×2.0×0.65
2.5×2.0×0.65
2.0×1.6×0.57
2.5×2.0×0.65
2.5×2.0×0.65
2.5×2.0×0.65
2.0×1.6×0.57
2.5×2.0×0.65
2.5×2.0×0.65
2.0×1.6×0.5
2.5×2.0×0.6
2.0×1.6×0.5
2.0×1.6×0.5
2.5×2.0×0.6
2.5×2.0×0.6
2.0×1.6×0.5
2.0×1.6×0.5
3.0×2.5×0.7
2.5×2.0×0.65
2.5×2.0×0.65
2.0×1.6×0.5
2.0×1.6×0.5
3.0×2.5×0.7
2.5×2.0×0.6
2.0×1.6×0.5
2.5×2.0×0.65
2.0×1.6×0.5
1.4/1.7
1.4/1.7
1.5/1.6
2.2/3.1
2.3/2.7
2.2/2.7
2.5/2.8
2.5/3.4
2.3/2.5
2.0/3.1
1.5/1.7
1.6/1.9
1.8/1.8
1.45/1.8
1.5/1.8
1.5/1.8
1.6/1.8
1.6/1.7
1.4/1.7
1.4/1.7
1.6/2.6
1.8/2.3
1.9/2.3
1.9/2.2
1.7/2.2
1.9/2.2
1.7/2.0
1.9/2.0
1.9/2.5
1.9/2.2
54/47
58/48
59/47
55/50
55/53
55/52
54/55
58/53
56/53
57/53
57/51
53/52
55/50
66/52
58/51
58/51
57/51
60/53
59/52
59/52
60/51
58/50
59/54
60/52
58/54
66/52
61/58
63/60
58/50
59/51
9 Pin, B Type
W-CDMA Band 1
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type
9 Pin, B Type Low Rx IL
9 Pin, B Type
PCS/W-CDMA Band 2
W-CDMA Band 4
9 Pin, B Type 100ohm, Low Rx IL
9 Pin, B Type Rx : Bal.100ohm High GPS Att. & Rx Isol.
9 Pin, B Type 100ohm
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type
D6PE1G960P3BY
FAR-D6JH-2G1325-B1YZ
D6JG2G132D3GZ
D6PE2G132P3DWB
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type
9 Pin, A Type
FAR-D5NG-881M50-M11Z
FAR-D5PF-881M50-M3E7
FAR-D5PF-881M50-M3E9
FAR-D5NE-881M50-P1A9
FAR-D5NE-881M50-P1A6Q
FAR-D5PE-881M50-P3EZ
FAR-D5PE-881M50-P3EY
D5NL881M5P1HY
9 Pin, B Type
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type 100ohm
9 Pin, B Type Rx : Bal.100ohm
9 Pin, A Type Rx : Bal.100ohm
SV-LTE
CDMA/W-CDMA Band 5
FAR-D5NH-942M50-M1Y9
FAR-D5NF-942M50-P1GWQ
D5PF942M5M3G9
9 Pin, B Type
9 Pin, B Type 100ohm, GPS High Att.
9 Pin, B Type
W-CDMA Band 8
D5PE942M5P3GT
9 Pin, B Type Rx : Bal.100ohm
SV-LTE
LTE Band 13
LTE Band 17
D5NL782M0P1JZ
FAR-D5NE-740M0-P1C9
D5PE740M0P3NZ
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type Rx : Bal.100ohm
D5NF878M0P1ET
CDMA BC0+BC10
D5PE878M0P3UT
●CDMA/GSM850/Band 5
Package Size
(mm)
Insertion Loss
(dB)
System
Part number
Attenuation(dB) Remarks
FAR-F5KB-836M50-B4ER
FAR-F5KB-836M50-B4EG
F5QA836M5M2AR
FAR-F5KA-836M50-D4DF
FAR-F5KB-881M50-B4ED
FAR-F5KY-881M50-B4UZ
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.7
1.6
1.9
1.9
1.5
1.5
1.4
1.5
1.5
1.7
1.6
1.7
1.3
44
42
45
44
61
61
64
60
56
56
46
53
63
100ohm input
200ohm input
High Att.
CDMA Tx
CDMA/GSM850 Tx
High Att.
100ohm output
100ohm, High Att.
200ohm output
100ohm output
100ohm, High Att., Low Loss
High Att.
CDMA/W-CDMA Band 5 Rx FAR-F5KB-881M50-B4EJ
FAR-F5QB-881M50-P2BG
F5QG881M5P2KG
FAR-F5KA-881M50-D4DB
GSM850/CDMA Rx
FAR-F5QA-881M50-M2AF
-
FAR-F5KB-881M50-B4EA
FAR-F5QB-881M50-P2BA
150ohm output
150ohm output
GSM850 Rx
●CDMA2000 BC0+BC10
Package Size
(mm)
Insertion Loss
(dB)
System
Part number
Attenuation(dB) Remarks
CDMA2000 BC0+10 Tx
CDMA2000 BC0+10 Rx
F5KA833M0D4DU
F5KY878M0B4ND
1.4×1.0×0.5
1.4×1.0×0.5
2.3
2.1
43
53
High Att.
100ohm output
●GSM/EGSM/Band 8
Package Size
(mm)
Insertion Loss
(dB)
System
Part number
Attenuation(dB) Remarks
FAR-F5KA-897M50-D4DC
FAR-F5KA-897M50-D4VW
F5QA879M5M2AC
FAR-F5KB-942M50-B4ES
FAR-F5KY-942M50-B4UW
FAR-F5KA-942M50-D4DD
FAR-F5KB-942M50-B4EB
FAR-F5QB-942M50-P2BB
F5KA942M5D4MYB
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.1×0.9×0.5
2.2
2.6
2.3
2.4
2.0
2.0
1.6
1.6
1.9
2.2
16
38
18
29
57
34
26
28
53
56
High Att.
High Att.
-
100ohm output
100ohm output, High Att.
High Att.
150ohm output
150ohm output
High Att.
EGSM Tx
EGSM Rx
F5QG942M5P2KB
100ohm output, High Att.
●DCS/Band 3
Package Size
(mm)
Insertion Loss
(dB)
System
DCS Tx
Part number
Attenuation(dB) Remarks
FAR-F6KA-1G7475-D4CY
FAR-F6KA-1G8425-D4CK
FAR-F6KB-1G8425-B4GA
F6QB1G842P2BM
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.1×0.9×0.5
2.5
2.1
1.5
1.8
1.6
30
20
14
15
17
150ohm output
100ohm
150ohm
DCS Rx
F6QB1G842P2BF
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
134
■ PART NUMBERS
●PCS/GSM1900/Band 2
Package Size
(mm)
Insertion Loss
(dB)
System
Part number
Attenuation(dB) Remarks
US-PCS Tx
FAR-F6KA-1G8800-L4AF
FAR-F6KB-1G8800-B4GS
F6QA1G880M2AQ
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
2.4
2.3
1.7
3.4
3.4
2.1
2.9
2.8
2.0
1.6
35
28
20
44
43
23
49
50
18
18
High Att.
100ohm input
US-PCS Rx
High Att.
High Att.
100ohm output
100ohm, High Att.
100ohm output
US-PCS Rx
FAR-F6KA-1G9600-D4MT
FAR-F6KB-1G9600-B4GP
FAR-F6KY-1G9600-B4UU
F6KY1G960B4NF
FAR-F6KA-1G9600-D4CR
FAR-F6KB-1G9600-B4GB
GSM1900/US-PCS Rx
GSM1900 Rx
150ohm output
●GSM Dual
Package Size
(mm)
Insertion Loss
(dB)
System
Part number
Attenuation(dB) Remarks
EGSM+DCS Rx
DCS+EGSM Rx
GSM850+EGSM Rx
FAR-G6KZ-1G8425-Y4WZ
FAR-G6KZ-1G8425-Y4WY
FAR-G5QC-942M50-N2FB
1.8×1.4×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.8/1.6
1.6/1.8
1.5/1.8
31/16
16/31
50/29
EGSM 150ohm output DCS 150ohm output
DCS 150ohm output EGSM 150ohm output
GSM850 150ohm output EGSM 150ohm output
GSM850+EGSM Rx
(Common Input)
GSM850+EGSM Rx
(Common Output)
FAR-G5KT-942M50-Y4RW
FAR-G5KW-942M50-Y4YD
1.8×1.4×0.5
1.8×1.4×0.5
1.9/2.2
2.5/1.8
50/25
32/38
GSM850 150ohm output EGSM 150ohm output
EGSM 150ohm output GSM850 150ohm output
FAR-G5KC-942M50-Y4YW
FAR-G5QC-942M50-N2CD
FAR-G5KT-942M50-Y4RZ
FAR-G5QD-942M50-N2DB
FAR-G6QC-1G9600-N2FA
G6QJ1G960M2MB
1.8×1.4×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.8/1.4
1.7/1.4
2.2/1.9
2.5/2.0
1.9/1.7
1.9/1.9
31/54
29/51
25/52
25/55
17/13
19/19
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
DCS 150ohm output GSM1900 150ohm output
Rx Dual Unbal
EGSM+GSM850 Rx
EGSM+GSM850 Rx
(Common Input)
DCS+GSM1900 Rx
DCS+GSM1900 Rx
(Common Input)
GSM1900+DCS Rx
GSM1900+DCS Rx
(Common Input)
G6QD1G960N2DY
1.5×1.1×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.8/1.9
1.6/1.2
1.9/1.8
18/14
13/15
13/18
1 IN 4 OUT 150ohm output
G6QC1G960N2CH
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
FAR-G6KT-1G9600-Y4RY
FAR-G6KW-1G9600-Y4YC
G6QE1G960N2EC
G6QE1G960N2EE
1.8×1.4×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.5×1.1×0.5
2.2/3.1
2.5/2.5
2.2/2.2
1.6/1.4
13/15
18/13
31/14
14/54
GSM1900 170ohm output DCS 170ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900/DCS 150ohm output Low Loss
GSM1900+DCS Rx
(Common Output)
GSM1900+850 Rx
G6QF1G960N2GA
GSM1900 150ohm output GSM850 150ohm output
●GPS
Package Size
(mm)
Insertion Loss
(dB)
System
Part number
Attenuation(dB) Remarks
FAR-F6KA-1G5754-L4AA
FAR-F6KA-1G5754-L4AJ
FAR-F6KA-1G5754-L4AB
FAR-F6QA-1G5754-H2JD
FAR-F6QA-1G5754-H2JE
F6QA1G575H2JF
FAR-F6KB-1G5754-B4GE
FAR-F6KB-1G5754-B4GU
FAR-F6KA-1G5859-D4MS
F6QA1G585M2AT
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.1×0.9×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.1×0.9×0.5
0.9
0.9
-
-
-
-
-
-
-
-
-
-
-
-
Low loss
Low loss, High Att.
Ultra Low loss
Low loss
0.44
0.87
1.27
0.96
1.1
GPS
High Att.
Low loss, High Att.
100ohm output, Low loss
100ohm output, High Att.
-
1.2
1.0/1.2
1.1/1.4
1.1/1.4
1.5/1.7
-
GPS/GNSS
FAR-F6KB-1G5859-B4HR
F6QB1G585P2BQ
100ohm output
100ohm output
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
135
■ PART NUMBERS
●W-CDMA
Package Size
(mm)
Insertion Loss
(dB)
System
Part number
Attenuation(dB) Remarks
FAR-F6KA-1G9500-D4DG
F6QA1G950M2AA
FAR-F6KA-2G1400-D4CG
FAR-F6KA-2G1400-D4DW
FAR-F6KY-2G1400-B4UY
F6QG2G140P2KA
G6QL2G140M2PA
G6QH2G140N2LP
FAR-G6KG-2G1400-Y4SH
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.8×1.4×0.5
1.6
1.8
1.9
1.9
1.8
1.7
1.9/3.0
3.2/2.3
1.6/1.5
38
38
39
48
64
55
48/41
53/54
42/64
Low loss, High Att.
Low loss, High Att.
W-CDMA Band 1 Tx
High Att.
100ohm, High Att.
100ohm, High Att.
W-CDMA Band 1+2 Rx
W-CDMA Band 2+1 Rx
W-CDMA Band 1+5 Rx
2 (1.9G)100ohm out 1 (2G)100ohm out
1 (2G) 200ohm out 5 (850) 200ohm out
W-CDMA Band 4 Tx
FAR-F6KA-1G7400-D4DE
G5QH942M5N2LN
1.4×1.0×0.5
1.5×1.1×0.5
1.5
44
W-CDMA Band 5+8 Rx
1.6/20
56/50
100ohm output
100ohm output
W-CDMA Band 8+5 Rx
(Common Output)
G5QT942M5N2VA
1.5×1.1×0.5
2.3/2.0
48/48
W-CDMA Band 7 Tx
F6KA2G535L4AM
FAR-F6KY-2G6550-B4UN
F6QG2G655P2KE
F5KA707M5D4JW
F5KY737M0B4NN
FAR-F5KA-782M00-D4VP
FAR-F5KY-751M00-B4UQ
FAR-F5KA-710M00-D4VQ
FAR-F5KY-740M00-B4UR
F5QG740M0P2KH
F5KA832M0D4JS
F5KA847M0D4ML
F5KY806M0B4NE
F6KY1G503B4NS
F6QA1G882M2AS
F6KB2G595B4HS
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.1×0.9×0.5
1.4×1.0×0.5
1.6
2.8
2.5
1.6
1.4
1.5
1.6
1.2
1.4
1.4
1.5
1.7
2.5
1.4
1.8
2.6
30
54
52
23
57
55
50
32
60
65
19
52
45
47
23
-
100ohm. High Att.
100ohm. High Att.
Unbal.
W-CDMA/LTE Band 7 Rx
LTE Band 12 Tx
LTE Band 12 Rx
LTE Band 13 Tx
LTE Band 13 Rx
LTE Band 17 Tx
100ohm output
100ohm output
100ohm output
100ohm output
Unbal.
LTE Band 17 Rx
LTE Band 18+5 (BC0) Tx
LTE Band 20 Tx
LTE Band 20 Rx
LTE Band 21 Rx
LTE Band 25 Tx
100ohm output
100ohm output Low loss
Unbal.
TD LTE Bnad 38 Rx
150ohm output
TD LTE Band 38+40
(Common output)
G6QE2G595N2EJ
1.5×1.1×0.5
2.9/2.8
-
Balanced 100ohm
F6KB2G350B4HT
F6KB2G350B4HTB
1.4×1.0×0.5
1.4×1.0×0.5
2.7
2.5
-
-
150ohm output
Balanced 100ohm
TD LTE Band 40 Rx
●Other
Package Size
(mm)
Insertion Loss
(dB)
System
Part number
Attenuation(dB) Remarks
ISM900 (B.W.26MHz)
FAR-F5QA-915M00-M2AK
FAR-F6KA-2G0175-D4DR
FAR-F6KA-1G9000-D4DS
G6QJ2G017M2MD
1.1×0.9×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.5×1.1×0.5
1.5×1.1×0.5
1.8
1.8
1.6
1.3/1.4
1.6/2.0
-
TD-SCDMA/TD-LTE Band 34
TD-SCDMA/TD-LTE Band 39
-
-
-
-
High Att
2 IN/2 OUT
1 IN/2 OUT
TD-SCDMA Band 34+39
G6QJ2G017M2RD
TD-SCDMA Band 39+34
(Common input)
TD-SCDMA Band 34+39
(Common input)
G6QD2G017N2DU
G6QD2G017N2DC
1.5×1.1×0.5
1.5×1.1×0.5
1.7/2.0
2.2/1.8
-
-
Balanced 100ohm
Balanced 200ohm
FAR-F6KA-2G4418-D4CU
FAR-F6KA-2G4418-A4VA
FAR-F6KA-2G4500-A4VD
F6KA2G436A4VE
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
1.4×1.0×0.5
2.6
3.0
1.9
2.5
2.8
-
-
-
-
-
+10dBm
+23dBm
Low IL,+19dBm
BW=72MHz,+24dBm
BW=68MHz,+24dBm
Wireless LAN
F6KA2G466A4VJ
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
136
SAW/FBAR DEVICES (FILTER / DUPLEXERS)
■PACKAGING
①Minimum Quantity
Type
Size(mm)
3.0×2.5
2.5×2.0
2.0×1.6
2.0×1.6
1.4×1.0
1.1×0.9
2.0×1.6
1.8×1.4
1.5×1.1
Code & Quantity(Pieces)
Z
Z
Z
Z
Z
3000
3000
3000
3000
3000
U
U
10000
10000
Duplexer
Y
Y
Y
Y
Y
Y
Y
15000
15000
15000
15000
15000
15000
15000
Single Filter
J
J
5000
5000
Z
Z
3000
3000
Dual Filter
②Tape material
●Taping dimensions
Type
Size(mm)
3.0×2.5
2.5×2.0
2.0×1.6
2.0×1.6
1.4×1.0
1.1×0.9
2.0×1.6
1.8×1.4
1.5×1.1
a
b
c
d
e
f
3.4±0.1
2.8±0.1
2.4±0.1
2.4±0.1
1.7±0.1
1.3±0.1
2.4±0.1
2.2±0.1
1.8±0.1
2.85±0.1
2.3±0.1
2.0±0.1
2.0±0.1
1.3±0.1
1.1±0.1
2.0
1.05±0.05
1.5+0.1/-0
1.05±0.05
1.05±0.05
0.5±0.05
0.5±0.05
1.05±0.05
0.5±0.05
0.5±0.05
1.55±0.05
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.55±0.05
1.5+0.1/-0
1.55±0.05
1.5+0.1/-0
1.0±0.1
1.0+0.1/-0.0
0.90-0.05
0.90-0.05
0.63±0.05
0.63±0.05
0.90-0.05
0.8±0.1
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.20±0.05
0.20±0.05
0.25±0.05
0.30±0.05
0.25±0.05
Unit:mm
Duplexer
Single Filter
Dual Filter
1.8
1.4
0.7±0.1
●Material of Tape(Conductive)
Tape : Polystyrene
Top cover tape : Polyethylene terephthalate(PET)and Polyethylene
③Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_pack_e-E02R01
④Reel size
●Material of Reel
Material : Polystyrene+Carbon
Characteristics : Conform to EIAJ-ET-7200A
Color : Black
Surface resistance(reference value) :109Ω/sq Max.
Code
Quantity
3,000 pcs
5,000 pcs
10,000 pcs
15,000 pcs
A
B
C
W1
W2
Z
J
U
Y
φ180.0 +0.0/-1.5
φ180.0 +0.0/-1.5
φ330.0 ±2.0
φ66.0 ±0.5
φ66.0 ±0.5
φ100.0 ±1.0
φ100.0 ±1.0
φ13.0 ±0.2
φ13.0 ±0.2
φ13.0 ±0.2
φ13.0 ±0.2
9.0 +1.0/-0.0
9.0 +1.0/-0.0
9.4 ±1.0
11.4 ±1.0
11.4 ±1.0
13.4 ±1.0
13.4 ±1.0
Unit:mm
φ330.0 ±2.0
9.4 ±1.0
⑤Reel label and Reel C-Label sticking and Winding method
●Surface
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_pack_e-E02R01
Filter
■RELIABILITY DATA
1. Terminal stregth
Specified Value
No damage to be found.
Bending Test.
according to IEC60068-2-21(JISC60068-2-21)
Test Methods and
Remarks
2. Mechanical shock
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions.
Remarks
according to IEC68-2-27(JISC60068-2-27).
3. Vibration
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a
Remarks
vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)
4. Drop 1
Specified Value
After testing, meet the specified characteristics at a room temperature.
Drop 3 times onto concrete floor from the height of 1.0m.
Test Methods and
Remarks
5. Drop 2
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.
6. Temperature cycling
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
Temp. range -40 to +100℃. 500cycle.
7. Static humidity
Specified Value
After testing, meet the specified characteristics at a room temperature.
+85℃, 90% to 95%RH, apply DC5V, 1000hours.
Test Methods and
Remarks
8. High temperature storage life
Specified Value
After testing, meet the specified characteristics at a room temperature.
+100℃, 1000hours.
Test Methods and
Remarks
9. Low temperature storage life
Specified Value
After testing, meet the specified characteristics at a room temperature.
-40℃, 1000hours.
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_reli_e-E02R01
10. Solderbility 1
Specified Value
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Test Methods and
Remarks
Lead-free Solder paste, Reflow;Peak temperature 245℃
11. Solderbility 2
Specified Value
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Test Methods and
Remarks
Sn-Pb Solder paste, Reflow;Peak temperature 235℃
12. Solder heat resistance
After testing, meet the specified characteristics at a room temperature.
Specified Value
A change of the remarkable appearance do not have it.
◆Recommended temperature profile of reflow soldering
Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.
Suitable condition for solder heating is differed depending on composition and manufacturing method.
Please contact to solder manufacturer for the details.
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_reli_e-E02R01
Duplexer
■RELIABILITY DATA
1. Terminal stregth
Specified Value
No damage to be found.
Bend width 4mm, hold for 5±1 sec.
according to IEC60068-2-21(JISC60068-2-21)
Test Methods and
Remarks
2. Mechanical shock
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions.
Remarks
according to IEC68-2-27(JISC60068-2-27).
3. Vibration
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a
Remarks
vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)
4. Drop 1
Specified Value
After testing, meet the specified characteristics at a room temperature.
Drop 3 times onto concrete floor from the height of 1.0m.
Test Methods and
Remarks
5. Drop 2
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.
6. Temperature cycling
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
Temp. range -40 to +100℃. 500cycle.
7. Static humidity
Specified Value
After testing, meet the specified characteristics at a room temperature.
+85℃, 90% to 95%RH, apply DC5V, 1000hours.
Test Methods and
Remarks
8. High temperature storage life
Specified Value
After testing, meet the specified characteristics at a room temperature.
+100℃, 1000hours.
Test Methods and
Remarks
9. Low temperature storage life
Specified Value
After testing, meet the specified characteristics at a room temperature.
-40℃, 1000hours.
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_reli_e-E02R01
10. High Temperature Bias
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
+50℃, +29dBm, 50000hours.
11. Solderbility 1
Specified Value
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Test Methods and
Remarks
Lead-free Solder paste, Reflow;Peak temperature 245℃
12. Solderbility 2
Specified Value
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Test Methods and
Remarks
Sn-Pb Solder paste, Reflow;Peak temperature 235℃
13. Solder heat resistance
After testing, meet the specified characteristics at a room temperature.
Specified Value
A change of the remarkable appearance do not have it.
◆Recommended temperature profile of reflow soldering
Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.
Suitable condition for solder heating is differed depending on composition and manufacturing method.
Please contact to solder manufacturer for the details.
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_reli_e-E02R01
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Taiyo Yuden:
D5NF878M0P1ET-Z D6HH1G960BH95-Z D6NF1G960P1BR-Z F5KA833M0D4MG-Z F5KY878M0B4ND-Z
F5QB881M5P2BG-J F6KA2G535L4AM-Z FAR-D5NA-881M50-P1A2-Z FAR-D5NC-881M50-M11A-Z FAR-D5NC-
881M50-M11B-Z FAR-D5NE-740M00-P1C9-Z FAR-D5NE-881M50-P1A6QZ FAR-D5NE-881M50-P1A9-Z FAR-D5NF-
942M50-P1GWQZ FAR-D5NF-942M50-P1GZ-Z FAR-D5NG-881M50-M11Z-Z FAR-D5NH-942M50-M1Y9-Z FAR-
D5PE-881M50-P3EZ-Z FAR-D5pF-881M50-M3E7-Z FAR-D5pF-911M50-M3J7-Z FAR-D6JG-2G1400-D3FZ-Z FAR-
D6JH-2G1325-B1YZ-Z FAR-D6JH-2G1400-B1BT-Z FAR-D6NF-1G9600-P1BT-Z FAR-D6NF-1G9600-P1BZ-Z FAR-
D6NH-1G9600-M1Z6-Z FAR-D6NH-1G9600-M1Z9-Z FAR-F5KA-836M50-D4CM-Z FAR-F5KB-859M00-B4EE-Z FAR-
F6KA-2G4418-A4VA-Z FAR-G5KK-911M50-D4KE-Z FAR-G5KL-911M50-D4XA-Z FAR-G5KL-911M50-D4XC-Z
F6KY1G960B4NF-Z D5PE740M0P3NZ-Z F6QA1G585M2AT-J F6QA1G880M2AQ-J F6QB1G585P2BQ-J FAR-
D5PF-881M50-M3E9-Z
相关型号:
D6R00F1LFS
Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.1A, 32VDC, 1.3N, Solder Terminal, Through Hole-straight, ROHS COMPLIANT
ITT
D6R00LFS
Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.1A, 32VDC, 1.3N, Solder Terminal, Through Hole-straight, ROHS COMPLIANT
ITT
D6R0F2LFS
Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.1A, 32VDC, 2.5N, Solder Terminal, Through Hole-straight, ROHS COMPLIANT
ITT
D6R10F1LFS
Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.1A, 32VDC, 1.3N, Solder Terminal, Through Hole-straight, ROHS COMPLIANT
ITT
©2020 ICPDF网 联系我们和版权申明